5
6HOHFWDQ2SWLRQ
3UHVV
✱
IRU+HOS
IRU+HOS
6HOHFWDQ2SWLRQ
Ü
=RQH5HYLHZ
PROGRAMMING THE NX1192E LCD KEYPADS
This section describes how to program the address and partition of each keypad, as well as
the options that are available. The address of the keypad is important because this is how
the panel supervises the keypads. The factory default for the “Master Code” is [1]-[2]-[3]-[4]
when using a 4-digit code, or [1]-[2]-[3]-[4]-[5]-[6] for a 6-digit code. The factory default for
the "Go To Program" code is [9]-[7]-[1]-[3] when using a 4-digit code, or [9]-[7]-[1]-[3]-[0]-[0]
for a 6-digit code.
USING THE FUNCTION MENU
Many of the functions shown below are in the Function Menu. Press [
7
] to access this menu.
Once the [
7
] key is depressed, the display will begin scrolling though a list of functions and
the corresponding number(s) associated with those functions. To access a function press the
number(s) listed for that function. If you already know the function numbers simply press [
7
]
followed by the function number.
NOTE: Some of the functions are not listed because they are installer-level functions.
These are samples of the displays that will
appear in the Function Menu. Each time the [
U
]
key is pressed the next menu item will be
displayed. Press the number or key to access
the function desired. Press the [#] key to exit.
The menu selections will scroll automatically. The other messages are shown below. For
further details regarding the functions, please refer to the page indicated.
0=Set Tone .................................. Page 9
1=Master Mode
2=Service Check ......................... Page 14
3=Alarm Memory ......................... Page 9
44=Test ....................................... Page 10
45=Display Test
46=Light Control .......................... Page 10
49=Spanish ................................. Page 10
5=User PIN .................................. Page 11
6=User Authority.......................... Page 11
7=Detector Reset......................... Page 12
90=Log Review............................ Page 7
91=View Settings......................... Page 5
97=Set Date/Time........................ Page 9
CHIME=Walk Test ....................... Page 12
EXIT=Silent Exit
U
U
9 1
ADJUSTING THE VIEW / BRIGHTNESS OF THE LCD
1) Enter [
U
]-[9]-[1]
The LCD Screen will prompt “Please Enter Your Code".
2) Enter [master code]
The LCD will now prompt you to raise or lower the viewing
angle. Using the scroll keys to the right of the LCD, you can
raise or lower the viewing angle of the text.
3) To advance to the
Brightness option, press
[
U
]
The LCD will prompt you to brighten or dim the LCD lighting.
Use the scroll keys again to adjust to desired brightness.
When completed, exit by pressing [
U
].
