To exit this screen, press [#].
Area 5 is selected and Area 5 is ready to arm. To exit the individual partition
mode, enter [
#
]-[
#
].
Silencing Alarms in the Multi-Partition Mode
If the keypad is sounding an alarm or the siren is running, it can be silenced by entering a code with the authority for
the area(s) that are in alarm.
NOTE
: The [
EXIT
], [
BYPASS
], and Alarm Memory [
r
]-[
3
] function keys will only work if
an individual partition is selected.
SERVICE DISPLAY
The following message will be displayed periodically if the security system requires service.
Service Required
Type
r
2 for help
If you see this display, press [
r
]-[
2
]. One or more of the following fault
messages will be displayed. Use the scroll keys to browse through
them. To exit the service messages, press [
#
] [
#
].
Control
Over Current
A short circuit of a control
=
s power supply has occurred.
Control
Siren Trouble
Open circuit has occurred on the bell or siren circuit.
Control
Box Tamper
(Optional) The Box Tamper circuit has activated.
Control
Phone Trouble
The Phone Line connected to the control is not operating properly.
Control
Fail to Comm.
The control attempted to communicate a message to the Central
Station, but was unsuccessful.
Control
Ground Fault
A short to ground has been detected on a control circuit.
Control
Loss of Time
Your system has lost total power and needs the clock reset.
Area 5 Ready
Type code to arm
13
