For custom messages in the second language:
NOTE
: The above [
r
]-[
9
]-[
2
] mode must be exited prior to changing languages.
1) Enter [
r
]-[
4
]-[
9
]
The keypad is now toggled to the second language.
2) Enter [
r
]-[
9
]-[
2
]
The LCD Screen will prompt “Please Enter Your Code".
3) Enter [
program code
]
The LCD will now prompt you to enter message number followed by [
#
]. Zones 1
through 192 custom messages are message numbers 1-192 respectively.
Message 193 - Custom message top line.
Message 194 - Custom message bottom line.
Message 195 - Shutdown message top line.
Message 196 - Shutdown message bottom line.
4) Enter message number
to edit followed by [
#
]
The LCD will display the zone number on the top line and the description will be
shown on the bottom line. Use the instructions on page 2 for editing character data.
To proceed to the next location, press the
[Police]
key. To return to the previous
location, press the
[Fire]
key. To re-enter the last location, press the
[Auxiliary]
key.
5) When completed, exit by pressing [
EXIT
] while the LCD screen is prompting for a zone message #. Any changes
will automatically be copied to all other LCD keypads in the system.
NOTE
: If you desire an LCD keypad to have a
different custom message, you must enable Custom Message Lock under the [
r
]-[
9
]-[
3
] function.
r
9 3 SET KEYPAD OPTIONS
1) Enter [
r
]-[
9
]-[
3
]
The LCD Screen will prompt “Please Enter Your Code”.
2) Enter [
program code
]
The LCD will now prompt you through the options listed on the following chart. The
current state of the option will be shown in the lower right corner of the display.
Press [
r
] to advance to the next option without making changes. Otherwise, follow
the directions on the bottom line to select the desired option. This will also advance
to the next option.
OPT
KEYPAD FEATURES
1
NOT USED
2
SILENT KEYPAD? Enable Silent Keypad Option.
If enabled, only the entry/exit and sounder chime are
silenced.
3
DING DONG CHIME? Enable Ding Dong Sound for Chime.
If off, chime will be a single tone. (Refer to
NX8-E Installation manual, location 40)
4
5 SEC. SILENCE? Enable Keypress Silence Option.
Silences the pulsing keypad sounder for 5
seconds when a key is pressed.
5
ARMED ZONE INFO? Enable Armed Zone Information
. If on, the LCD keypad will display faulted or
bypassed zone information when the system is armed.
6
BEEP ON PANICS? Enable Panic, Fire, and Medical Beeptone.
Will sound a short beep to verify that
the keypress was accepted.
7
DISABLE SERVICE? Suppresses the "Service" Message.
This will not allow the "Service Required"
message to be displayed for any reason. If there is a system trouble, [
r
]-[
2
] will still show the "Service
Required" menu.
8
MASTER KEYPAD? Enable Multi-partition Mode
9
CUSTOM MESSAGE? Enable Custom Message Display
10
CLOCK? Enable Clock Display
11
CUSTOM MSG. LOCK? Enable Custom Message Lock.
Prevents over-writing the custom message
during keypad copy.
12
SELECT AN OPTION:
Programs special characteristics.
1
=Display “Press
r
For Help”
2
=Disable LED Extinguish on this keypad
3
=On if PIN should be hidden when programming
4
=On suppresses beeps when an RF
transmission is lost
5-8
=RESERVED (
Do not program!
)
6
