20
TruVision HD-TVI Series 4 PTZ Dome Camera Configuration Manual
When the zoom rate is less than the zoom limit, the IR switches to
the near/medium-distance IR LED.
LED CONTROL
Set the LED control. Select one of the options:
ALL ON
:
Enable all IR LEDs
FAR ON
: Enable long-distance IR LEDs
NEAR ON
: Enable near/medium-distance IR LEDs
AUTO
: Enable IR LED automatically depending on the light
conditions
ICR
: Adjust the IR LED working mode according to the ICR (infrared
cut filter)
CLOSE
: Disable IR LEDs
SWITCH DELAY(S) This is the time delay in switching between long-distance IR LED and
N/M-distance IR LED.
SMART IR
This function is implemented to decrease the over exposure of IR
light and it can be set from 0 to 15. The higher the value is, the higher
suppress level of IR over exposure.
Restore Camera
Enter
MAIN MENU
>
RESTORE CAMERA
Click
IRIS+
to restore the camera settings to the default value, or click
IRIS-
to
exit.
Note:
Camera settings include the image parameters, lens settings and display
settings.
Restore Settings
You can reset all dome settings to factory default parameters.
Note
: Dome settings are mainly of PTZ parameters and alarm parameters. They
also include some system settings, such as the dome address.
Enter default dome settings menu:
MAIN MENUS
>
RESTORE DEFAULTS
Click
IRIS+
to restore the dome settings to the default value or click
IRIS-
to exit.
Reboot Dome
Enter
MAIN MENU
>
REBOOT DOME
. Click
IRIS+
to reboot the PTZ dome
remotely.
Language
Enter
MAIN MENU
>
LANGUAGE
. Click left or right to change the language and
click
IRIS+
to confirm the language.