8
TruVision HD-TVI Series 4 PTZ Dome Camera Configuration Manual
PRESET FOCUS
ON
: Enable the preset direct focus function to also record the focus
(F) value.
OFF
: Disable the preset direct focus function.
PROTOCOL
ENABLE
ON
: The user-defined protocol is enabled.
OFF
: The user-defined protocol is disabled.
PROTOCOL
Define the protocol:
UTC RS-485
,
PELCO-P
,
PELCO-D
,
DIGIPLEX
,
or
ASCII
.
485 CHECK
Set to
ON
or
AUTO
for automatic RS-485 configuration diagnosis.
If the configuration is incorrect, an alert will be received. If you set the
value as
AUTO
, it will automatically stop the diagnosis when no
errors exist.
MEMORY TIME
The dome resumes its previous PTZ status when it restarts after a
power-off and had stopped at the position longer than the predefined
time. Set the memory time to 10s, 30s, 60s, 180s, or 300s.
NEAR FOCUS
LEVEL
This is a debug interface. It ranges from 0 to 2. Select one level to
have the optimal focus speed and accuracy depending on the actual
scenario.
Camera Settings
You can set the camera parameters including focus, shutter speed, iris, etc.
CAMERA
GAIN LIMIT 15
DEFOG OFF
INIT LENS OFF
BACK EXIT
FOCUS
Set the focus mode.
AF
(Autofocus): The lens remains in focus during PTZ movements.
MF
(Manual Focus): Manually adjust the focus using the Focus+ and
Focus- buttons.
HAF
(Half-autofocus): The PTZ dome only focuses automatically
once after panning, tilting and zooming.
Note
: The focus mode needs to be changed to
MF
before controlling
Focus in the PTZ panel.
