![background image](http://html1.mh-extra.com/html/interlogix/4-series/4-series_configuration-manual_2077133020.webp)
18
TruVision HD-TVI Series 4 PTZ Dome Camera Configuration Manual
ALARM SETTING
ALARM NO. 1
PRIORITY HIGH
LINK NONE
ALARM OUTPUT NONE
ALARM INPUT OPEN
BACK EXIT
Alarm Output
An alarm output is a configurable alarm output interface on the PTZ dome back
box which can connect and trigger another alarm device to operate.
ALARM OUTPUT
Set the alarm output type as OPEN (normally
open) or CLOSE (normally closed).
Note
: Only one alarm output can be configured.
The second alarm output cannot be configured.
OUTPUT1, OUTPUT2
OPEN:
Set the alarm output to normally open.
CLOSE:
Set the alarm output to normally closed.
DWELL TIME
This is the duration of the alarm output signal. Set
the value between 0 and 60 seconds.
Clear Settings
PRESETS
Clear all the settings of presets.
PRESET TOURS
Clear all the settings of preset tours
SHADOW
TOURS
Clear all the settings of shadow tours
MASKS
Clear all the settings of masks.
ZONES
Clear all the settings of zones.
TIME TASKS
Clear all the settings of timing tasks.
Zones
A zone is a panning and tilting area defined by left/right limits. You can configure
the zones in the
ZONES
submenu. Define a zone when the targeted surveillance
scene is limited.