74
u
If your system was running Windows NT 4.0 Service Pack software, install this software
after installing drivers and other system software, and after installing any application
software products.
u
Perform any operational changes required for your system as described in Chapter 4,
“Operating Notes.”
Do the following after you install the Windows NT Service Pack:
u
If you created a Quick-Fix Engineering (QFE) backup diskette from Version Manager
during any previous initial system configuration, install the QFE update software. See
the
README
.
TXT
file on the QFE diskette for more information.
u
Complete the additional installation and configuration tasks in this section.
Installing the Ensoniq Sound Adapter Driver
Systems with an audio option include an Ensoniq sound card. The Ensoniq sound card is
delivered with a software CD-ROM that contains driver software, wavetable and mixer
software, and online documentation for installing and using the sound card. However, the
online Ensoniq documentation does not describe how to install the software on a system
running Windows NT 4.0 -- for example, if you must reinstall the operating system, or if you
add a system audio option.
To install the Ensoniq driver, wavetable, and mixer software:
1. Insert the Ensoniq software CD-ROM into the system’s CD-ROM drive.
2. From the Start menu, go to Settings/Control Panel/Multimedia/Devices (tab); then click
Add..
3. In the Add dialog, in the List of Drivers, click Unlisted or Updated Driver; then click
OK.
4. In the Install Driver dialog, type the path to the Windows NT software on the CD-ROM;
then click OK. The Windows NT software can be found on the CD-ROM at
\winnt\language\cd, where language is the language of the operating system (for
example, english).
5. After the software has been installed, in the Add Unlisted or Updated Driver dialog,
select Ensoniq AudioPCI; then click OK.
6. When the configuration dialog displays, click OK to accept the default settings.
7. In the Multimedia Properties dialog, click OK.
8. Remove the CD-ROM from the system; then restart the system.
After you install the software, see Chapter 4, “Operating Notes,” to set up quick access to
system audio through the Taskbar or the Start menu.
