54
To log on to the operating system:
1. If the logon dialog does not display, press
CTRL
+
ALT
+
DELETE
to display it.
2. Type a username and password into the appropriate boxes.
3. If appropriate, type a domain name.
4. Select OK or press
ENTER
.
To log off, restart, or shut down the operating system:
1. Select Shut Down from the Start menu.
2. Perform one of the following steps, as appropriate:
−
To log off the operating system, select the “
close all programs”
option (if
given), and then select OK.
−
To restart the system, select the restart option, and then select OK.
−
To shut down the system, select the shutdown option, and then select OK.
After shutting down or logging off the operating system, you can turn off the power to the
base unit and monitor.
You can start the system in MS-DOS from the Windows 95 Startup menu. If you do this, the
drivers for the CD-ROM drive and the mouse do not load automatically. To enable use of
the CD-ROM drive and the mouse in MS-DOS, you must load their drivers manually after
the system starts in MS-DOS.
To start the system in MS-DOS from the Windows 95 Start menu:
1. Restart the system.
2. When the message
Starting Windows 95
displays, press
F
8. The Windows 95
Startup Menu displays.
3. Select the Command Prompt option, and then press
ENTER
.
To load the CD-ROM drive and mouse drivers in MS-DOS:
At the MS-DOS command prompt, key in windows\dosstart.bat. This runs
DOSSTART
.
BAT
,
which loads the drivers for the CD-ROM drive and the mouse.
NOTE
You need not run
DOSSTART
.
BAT
if you put the system into MS-DOS mode from within
Windows 95.
For more information on starting and stopping the operating system, see the operating
system documentation and Help.
