9330 Operating Manual
Interface Inc.
● 7401 East Butherus Drive, Scottsdale, Arizona 85260 USA ● Phone 480.948.5555 ● Fax 480.948.1924
www.interfaceforce.com
● Email:
●
800.947.5598
Document Number 15-216 Rev B
Page 52 of 74
4.4.2.
User offset
– Additional offset in percent, which defines output value at zero analog
input value.
A.
E.g. if set to 50%, analog out value will be half of the positive range.
B.
2.5V at 0-5V or ±5V.
F
IGURE
51
-
U
SER OFFSET
4.4.3.
User scaling factor
– Scaling factor to adapt analog input physical values to analog
output.
A.
If using User offset, set User offset first, then User scaling.
F
IGURE
52
-
U
SER SCALING FACTOR
4.4.4.
Analog output mode
A.
Active, follows analog input
– Output value depends on setting and analog input value of
the same input channel number.
B.
Input independent, write direct only
– Use analog output DAC directly.
C.
Channel off
– Channel switch is off.
F
IGURE
53
-
A
NALOG OUTPUT MODE
