background image

SGSW5016 16 ga. Stapler

Made In China  

DB

Limited Five (5) Year Warranty for

Pneumatic Staplers

Our products are designed and constructed using the highest standards of both 

material and workmanship. We warrant to the original retail purchaser that their 

staplers will be free from defects in material or workmanship for the warranty period 

of five years.

During the warranty period (which begins on the purchase date), we will repair or 

replace, at our option and expense, any product or part that is defective in materials 

or workmanship after examination by an Authorized Warranty Service Center, subject 

to the exceptions, exclusions and limitations described below. Any replacement 

product or part will carry a warranty for the balance of the warranty period applicable 

to the replaced product or part. A DATED SALES RECEIPT OR PROOF OF PURCHASE 

FROM THE ORIGINAL RETAIL PURCHASER IS REQUIRED TO MAKE A WARRANTY 

CLAIM. To make a warranty claim, you must return the product, with proper receipt/

proof of purchase and return transportation charges prepaid, to us (your dealer) or 

an Authorized Warranty Service Center. We will perform our obligations under this 

warranty within a reasonable time after approval of the warranty claim.

The following warranty exclusions apply:

1. Normal wear parts are not covered under this warranty. Normal wear parts 

include, for example, rubber o-rings, seals and driver blades.

2. This warranty does not cover parts damaged due to normal wear, misappli-

cation, misuse, accidents, operation at other than recommended speeds, 

improper storage, or damage resulting during shipping.

3. Products used in production/industrial applications are excluded from this 

warranty.

4.  Labor charges, maintenance, or loss, damage and repairs resulting from 

improper operation are not covered by this warranty.

This warranty will be honored, only if:

1. Clean, dry, regulated compressed air has been used at air pressure not 

exceeding the maximum indicated on the tool casting;

2. No evidence of abuse, abnormal conditions, accident, neglect, misuse or 

improper modifications or storage of the product exists; and

3. No deviations from following recommended operating instructions, specifi-

cations, and maintenance schedules exist. (Read Operator Manual for use, 

specifications, and maintenance instructions).

This warranty is the only warranty for the product and we disclaim all other war-

ranties. Any implied warranties will be limited in duration to the applicable warranty 

period specified above. Some states do not allow limitations on how long an implied 

warranty lasts, so the above limitation may not apply to you. Your remedies are 

solely and exclusively as stated above. We shall in no event be liable for incidental, 

consequential, indirect or special damages. Some states do not allow the exclusion or 

limitation of incidental or consequential damages, so the above limitation or exclusion 

may not apply to you. In no event, whether as a result of a breach of contract, warran-

ty, tort (including negligence) or otherwise, shall our liability exceed the price of the 

product that has given rise to the claim or liability. Any liability connected with the use 

of this product shall terminate upon the expiration of the warranty period specified 

above. No employee or representative of any distributor or dealer is authorized to 

make any change or modification to this warranty.

This warranty gives you specific legal rights, and you may also have other rights, 

which vary from state to state.

Interchange Brands SGSW5016 

Operator’s Manual (4/17/14)

Summary of Contents for SGSW5016





















Reviews: