D-0134090-A – 2022/11
VisualEyes™ - Instructions for Use - EN
Page
22
2.6.1 VNG and vHIT goggles
Depending on the configuration, the VisualEyes™ system comes with a variety of VNG and vHIT goggles:
•
VisualEyes™ EyeSeeCam:
EyeSeeCam goggle
•
Orion Auto-Traverse Basic and Comprehensive Basic: Top Mount goggle
•
VisualEyes™ 505/515/525:
Side/Top/Front Mount goggles
2.6.1.1 Side mount goggles
The VisualEyes™ side mount goggles allow for eye-movement recording during various test conditions, both
with and without visual stimulation.
The goggles can be configured with either one or two cameras, and with
either FireWire® or USB connection. The goggle comes with a removable cover for light occlusion. This is
magnetically fixed, and can easily be removed for oculomotor testing. The mask has an adjustable Velcro
head strap that comfortably secures the goggles to the patient.
The side mount goggles come with replaceable foam pads that are meant for single use as reuse
of foam pads can cause cross contamination. This should be changed after every single use by
pulling the used foam pad off of the hook and loop pads on the inside of the mask and then
aligning a new foam pad on top of the hook and loop.
Figure 2.6-2: Side mount goggle with removable cover (left), and replaceable single-use foam pads (right)
The cameras are fixed on the side of the goggle. The cameras are fixed using magnets, along with fixation
screws on the top and bottom of the goggle. The fixation screws can be loosened or tightened using the
included hexagon screwdriver.
If the goggle only has one camera, this can be moved to either side of the goggle to record either the left or
right eye. You can insert a cover into the camera slot in the opposite side to block out light in vision-denied
tests.
