SC User Guide — V
3.14
www.intelliview.ca
11
SC Interface
Section 2: SC Interface
Green:
online
Gray:
offline due to either having been disconnected or lost power
Crossed Out (X):
SmrtHVR disconnected, turned off, or incorrect
camera settings.
5.
Video Panel
: If using the standard SC, the screen displays live
camera feeds 24/7. If using the SC +, the screen displays the IntelliView
logo constantly, until an alarm is triggered by the analytics. In the SC +,
the streaming time of the alarm video can be set in the camera settings,
accessible by right clicking on the camera icon and selecting Edit.
There are four viewing tools located outside the video panel.
Full Screen icon
(center top): for shifting between full screen and
standard screen modes
Left and Right Arrows
(active with multiple screens): for navigating
through video screens or screen sets (depending on the layout used).
Manual/Auto Screen Rotation icon
(center bottom): to flip video
screens automatically every 20 seconds versus manually (using the left
and right arrows)
Each camera feed window is identified by the information in the camera bar,
which contains the camera’s Site Name, Camera Name, and IP address.
The bar blinks when an alarm goes off.
6.
Alarms and Events Panel.
This is where the alarms and events lists
are located.
The alarms, along with their video snapshot, are displayed under the
Alarms tab the moment a user-defined rule for each camera is triggered. Up
to 100 alarms can be stored.
Meanwhile, under the Events tab you will find a list of system actions (E.g.
file deletion) and communication between the SC and the SmrtHVR (E.g.
system registration).
This feature is explained in detail in Section 5.
2.3
Managing Users
The SC allows users to be added, managed and assigned varying
permission levels.
