Intellinet 523868, User Manual

Page: 37 / 56

2.2.11.3 History Chart
display information for different ports and statistics items on this chart. Since this shows the
history of the statistics information, the line chart keeps the old data even when it is refreshed.
2.2.12 Save Configuration
Click “Save” to make the settings permanent by saving to the Flash memory (“Submit” only
saves changes to the RAM memory; such changes will be lost if the switch is turned off). If you
want to reset the switch’s configuration, click “OK” to reset
the configuration file to factory defaults. A system reboot
will follow this restoration process.
NOTE: You will lose all of your own configurations when
you choose to restore the factory default configurations.
2.3 command Line interface
This section describes how to use console interface to configure the switch. The switch provides
RS-232 connectors to connect to your PC. Use a terminal emulator on your PC — such as
HyperTerminal or command line interpreter — to configure the switch. Configure the terminal
emulator with a baud rate of 9600, 8-bit data, no parity, 1-stop bit and no flow control. Once
you’re in ClI mode, typing “?” will display all available command help messages. This is very
useful if you’re unfamiliar with the ClI commands. All the ClI commands are case sensitive.
2.3.1 Power on
Power On Self Test (POST) is executed during the system booting period. It tests system memory,
leds and hardware chips on the switchboard. It displays system information as the result of
system testing and initialization. You can ignore all information until the prompt “Switch login:”
appears.
2.3.1.1 Boot ROM Command Mode
during the PoST process, you can enter a Boot RoM Command mode by pressing the “enter”
key. Type the “?” key to show the help messages for all available commands.
NOTE: Although the commands are helpful in some situations, it is strongly recommended that
users not use them if they don’t know the command function.
37
COMMAND LINE INTERFACE