Intellinet 509060, User Manual

Page: 30 / 76

mkdir /var/spool/lpd/pserverd
chown daemon /var/spool/lpd/pserverd
chgrp daemon /var/spool/lpd/pserverd
chmod 775 /var/spool/lpd/pserverd
3. Add an entry to the host’s /etc/printcap file, similar to the following:
printer-name:\
:lp=:\
:rm=203.66.191.186:\
:rp=p1:\
:lf=/var/spool/lpd/pserverd.log:\
:sd=/var/spool/lpd/pserverd:\
:mx#0:
lines should be indented with tabs. More than one printer name can be used, with
variants separated by vertical bars (name1|name2).
The rm= entry should correspond to the IP address you have assigned to the print
server. You can also use a hostname if you’ve assigned one in the /etc/hosts file.
The sd= entry should correspond to the spool directory you created in the previous
step.
The rp= entry should correspond to the port name of the remote printer. The values
should be one of p1, p2 or p3, depending on the printer port.
The print server should now be available for printing from your Unix host.
7. configUration Utility
7.1 Introduction
This chapter introduces the print server’s system configuration utility in a Windows
environment. This utility is automatically installed during the Windows Administrator
utility installation procedure (refer to sections 3.2 and 3.3).
This utility provides the most complete management and configuration functions
on the print server side. This utility only provides configuration functions for the
print server itself; it does not include configuration functions for the client side or
other file servers or NetWare servers in the network environment.
The Configuration utility provides the following configuration and management
functions (with detailed subsections that follow):
• Search Print Server: Search all available printer servers on the network.
• Print Server Status: display print server network status.
• General Configuration: General information about the print server.
• TCP/IP Configuration: IP address and DHCP server configuration.
• NetWare Configuration: NetWare printing configuration.
• AppleTalk Configuration: AppleTalk protocol settings.
• Bonjour Configuration: Mac OSX protocol settings.
• SMB: Configure the SMB group name.
• SNMP Configuration: SNMP information configuration.
• Setup Wizard: Guide to all the settings.
• System Configuration: Print server network ability settings, firmware upgrades
and language settings.
• Wireless Configuration: Wireless LAN configuration.
• Report: list the status of all available print servers on the network.
30
CONFIGURATION UTILITY