manualshive.com logo in svg

Intellinet 509060, User Manual

Share
Download
Intellinet 509060 User Manual Download Page 24

9. You have now successfully 

  added the printer to the PC.

  Information about the 

  printer is displayed on 

  screen. Click “Finish.”

4.  WindoWS nt/2000/Server 2003 netWork

4.1  system architecture

In a Windows network environment, in addition to the Peer-to-Peer network 

printing architecture described in the previous chapter, the 1-Port USB Wireless 

Print Server also offers the server-based printing architecture for Windows NT/2000/

Server 2003. only one Windows NT/2000/Server 2003 workstation is required to 

have the Windows PTPP (Peer-to-Peer Printing) driver installed — it can share the 

printing service on the network so other network users can simply connect to the 

server and access the shared printer (see below).

4.2  windows nt/2000/server 2003 Installation and setup

The following procedure is for the installation and construct of a peer-to-peer 

connection (PTPP) between Windows NT/2000/Server 2003 and the print server.

1. If this is your first time installing the print server, install the administrator software

 

  on Windows NT/2000/Server 2003 first. (Refer to section 3.2 for installation

 

  instructions.)

24

NT/2000/SERVER 2003

Summary of Contents for 509060













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands