manualshive.com logo in svg

Intellinet 509060, User Manual

Share
Download
Intellinet 509060 User Manual Download Page 10

3.2  administrator Installation and setup

The Administrator Installation can be performed on Windows 98Se/Me/NT/2000/

XP/Server 2003/Vista with the same user interface. Before the installation, verify 

that your network protocol is installed on your PC (TCP/IP, IPX and/or NetBeUI). It 

will be helpful in your installation process.
Insert the Cd included with  

the print server into your  

Cd-RoM drive. The  

Autorun.exe program should 

be executed automatically.  

If not, run Autorun.exe  

manually from the Cd-RoM  

drive’s root directory. The  

Installation Manager will be 

displayed on the screen  

(shown at right). Click  

“Administrator Installation.”

The “Utilities Setup” window 

will be displayed. Click  

“Next.”

Click “Next” to install the  

utilities in the default folder,  

or click “Browse” to specify  

the destination folder where  

you would like to install the  

utilities.

10

WINDOWS PEER-TO-PEER NETWORK

Summary of Contents for 509060













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands