FLX-64 Installation Guide
8
The Intelix FLX-64 was designed for use in conference rooms that have two in-room inputs extended to the rack, a
few local sources at the rack, two discrete displays, a VTC codec, and a recorder.
The FLX-64 features four HDMI inputs, of which two allow analog audio embedding on balanced inputs. Two
HDBaseT inputs are also provided. The HDBaseT inputs support 1080p HDMI video with audio, wide-band IR
tunneling (for IR control of sources), RS232 routing, and HDCP up to 60 meters (196 feet). Each HDBaseT input
port supplies power to the attached extender, eliminating the need for a power supply at the source end. All
inputs feature selectable HDCP compliance and advanced EDID handling to address challenging system design
parameters.
The FLX-64 features HDBaseT twisted pair extension for each output, and simultaneous HDMI on the first two
outputs, allowing the same signal to be routed to the HDMI connector and a remote destination with an HDBaseT
receiver. The HDBaseT ports support 1080p HDMI video with audio, wide-band IR tunneling (for IR control of
displays), RS232 tunneling and routing, and HDCP up to 60 meters (196 feet). Each output features a stereo audio
de-embedder for balanced connection to amplifiers or DSPs. Audio outputs feature breakaway capabilities,
allowing audio from the sources to be sent to any output. Each HDBaseT output port supplies power to the attached
extender, eliminating the need for a power supply at the display end.
The FLX-64 can be controlled via front panel buttons, front panel IR, external IR, remote IR through HDBaseT
extenders, RS232, and Ethernet. Clear button caps provide legible text on the front panel, which can be customized
for each installation. The matrix includes a simple IR remote control to allow IR switching. This IR remote control
can be learned into universal remotes and IR based control systems. An IR All In port is provided, which allows one
IR connection to control all four remote displays.
The matrix also features a full command set for RS232 and Ethernet control with third party control systems, plus
control and system configuration via a web browser. RS232 commands to remote displays can also be embedded
in the control stream through the matrix from both the RS232 and Ethernet control ports, which will reduce the
number of serial ports required for the control system.
Product Overview
Summary of Contents for FLX-64
Page 2: ......
Page 43: ...FLX 64 Installation Guide 43...
