FLX-64 Installation Guide
41
Technical Specifications
Input/Output Connections
HDMI Inputs (Inputs 1 through 4)
Four (4) HDMI Type A Receptacle
HDBaseT Inputs (Inputs 5 and 6)
Two (2) 8P8C Port (Shielded RJ45 Female)
Balanced Analog Audio Inputs (Inputs 1 and 2 only)
Two (2) 5-Pole/3.5mm Euroblock
IR Input Tunnel (Inputs 5 and 6, Outputs 1 through 4)
Six (6) 3.5mm TRS
HDMI Outputs (Outputs 1 and 2 only)
Two (2) HDMI Type A Receptacle
HDBaseT Outputs
Four (4) 8P8C Port (Shielded RJ45 Female)
Balanced Analog Audio Outputs
Four (4) 5-Pole/3.5mm Euroblock
RS232 Output Tunnel
Four (4) 3-Pole/3.5mm Euroblock
IR All In
One (1) 3.5mm TRS
IR Eye
One (1) 3.5mm TRS
TCP/IP
One (1) 8P8C Port (Shielded RJ45 Female)
RS232
One (1) DE9 Port Female
AC Power Inlet
IEC C14
Supported Audio, Video, and Embedded Control
Maximum Video Compatibility at 60 m
Deep Color 36/30/24 Bit at 1080p
Maximum Video Compatibility at 35 m
Deep Color 48 Bit at 1080p and 3D
Maximum Passive HDMI Cable Distance
5 m (16.4 ft)
Video Compliance
HDMI and HDCP
Embedded Audio
Up to PCM 8 channel, Dolby Digital TrueHD, and DTS-HD Master Audio
Input DDC Signal
5.0 volts p-p (TTL)
Input Video Signal
0.5 to 1.0 volts p-p
Analog Audio Pinout
Left +, Left -, Ground, Right +, Right -
Embedded RS232 Baud Rate
2400, 4800, 9600, 19200, 38400, and 115200 baud
IR Carrier Frequency Range
33-55kHz at 5 volts
HDBaseT Signal Characteristics
Maximum Distance
60 m
Cable Requirements
Solid core shielded Category 5e, Category 6 or greater with TIA/EIA-568B crimp pattern
Bandwidth
10.2 Gbps
Gain
0 dB – 10 dB at 100 MHz
Signal to Noise Ratio (SNR)
> 70 dB at 100 MHz over 100 m
Return Loss
< -30 dB at 5 KHz
Total Harmonic Distortion (THD)
< 0.005% at 1 KHz
Min-Max Signal Level
< 0.3 V – 1.45 Vp-p
Differential Phase Error
±10° at 135 MHz over 100 m
Summary of Contents for FLX-64
Page 2: ......
Page 43: ...FLX 64 Installation Guide 43...
