Intelix FLX-64, Installation And Operation Manual

Page: 32 / 44

FLX-64 Installation Guide
32
Users Interface Configuration Network Display Control Out Display Control In
Main
FLX-64
Save Cancel
HDCP Compliance:
EDID Copy:
Audio Source:
Input 1
Input 2
On Off
Input 1
Input 2
Analog HDMI
HDMI Output Audio:
Output 1
Output 2
Off On
Output 3
Output 4
Input 3
Input 4
Input 5
Input 6
copy from output: to input: Go!
The page at 192.168.0.178 says:
set EDID Copy success!
OK
The page at 192.168.0.178 says:
set HDCP Compliance success, but EDID Copy item No
Selected!
OK
HDCP, EDID, and Audio Configuration Tab
The Configuration setup screen has options to turn on and off the HDCP compliance flag for an input, select the
audio input source for inputs 1 and 2, enable or disable the digital audio output, and copy the EDID from an output
to an input. For more information on HDCP compliance, please see page 30 .
» HDCP Compliance
◊ Turns on or off HDCP compliance for each input.
» Audio Source
◊ Selects Analog or HDMI audio for inputs 1 and 2
» HDMI Output Audio
◊ Turns on or off HDMI output audio for each output.
» EDID copy
◊ Copies the EDID from an output to an input.
◊ Hybrid copy will substitute 2 channel PCM for the audio settings of the copied display
◊ Full copy will copy the entire EDID table of the display
After the “EDID copy mode”, “output to copy from”, and “input to copy to” are selected, click the Go! button. You
will be presented with an EDID copy success window after the changes are successfully applied to the matrix.
After making changes to any settings other than EDID copy, the following message will appear: