Intelix FLX-64, Installation And Operation Manual

Page: 18 / 44

FLX-64 Installation Guide
18
Connect IR Control
Insert the removable 5-pole terminal block to the appropriate
output zone terminal.
The audio that passes to the analog audio outputs is determined
by either directly switching the source to the analog audio output
in the web GUI (see page 25) or RS232 (see page 28) or by
switching the paired digital video and analog audio output signals
in the web GUI (see page 26) or RS232 (see page 28).
Insert the removable 5-pole terminal block to the appropriate input
terminal. Use the web GUI (see page 32) or the RS232 command
(see page 35) to enable the use of the analog audio input.
The analog audio inputs are paired with the respective HDMI input.
IR Adapter Cable Pinout
Analog Audio Input
Analog Audio Output
The FLX-64 features IR input connections for the remote devices connected to the HDBaseT inputs, IR input
connections for the remote displays connected to the HDBaseT outputs, an IR input connection to control all remote
HDBaseT devices, and an IR input connection to control the matrix. For remote sources that require IR control,
Intelix recommends using the DIGI-HD60C-S. For remote displays that require IR control, Intelix recommends using
the DIGI-HD60C-R.
Only use the included IR receiver or the included IR adapter cables with the FLX-64. The IR adapter cables allow
third party controllers to connect directly to the IR input ports of the FLX-64. If addition IR receivers are required,
the DIGIB-EYE is a compatible substitute. Third party 12V DC IR components are not compatible with the FLX-64.
To
Matrix
To
Controller
IR +
IR -
IR + (red)
IR - (black)
If the third party controller does not use a 3.5 mm TS plug, the included IR adapter may need to be modified. The
tip is IR+ (red wire), and the ring is IR-/ground (black wire).