INTELCO ELECTRONICS
9
ISO9001/2008
Rev. 1.00 January 2015
Programming Administrator Function
In this section demonstrate full functionality of programming Administrator Function.
Installer of Keylock is considered as Administrator of the device. Administrator can edit
his own password. Furthermore administrator has some extra authority on the device
which is the ability to disable User/s password/s, one by one or all together.
This operation called Reset of User Password.
Change Administrator Password:
While device is powered up administrator can handle is password according the below
way.
Note:
Factory preset Admin password is “0000”
0000
3546
Admin / Old
password
Admin / New
password
Reset User Password:
In order to make this actions, administrator has to set the Admin password before. This
way ensure that only unique administrator of current Keylock device can handle the
users passwords.
Administrator can reset users password with 2 ways:
One-By-One:
Reset any password refers to Password Protected Relay.
All Together:
Reset all passwords refers to Password Protected Relays.
3546
02
Current Admin
password
Relay to
Reset
3546
99
Current Admin
password
Reset All
passwords
