INTELCO ELECTRONICS
6
ISO9001/2008
Rev. 1.00 January 2015
Programming:
In this section demonstrate full functionality of
Password Protected
Relay
working
mode.
By enable password at any relay
Password Protected Relay
function is activated.
Disable the last password has been set on a relay will Disable the
Password Protected
Relay
function and
Unprotected Relay
function will be enabled.
Enable Password:
While desired relay password is disabled, set “000” as User / Old password (
Factory
preset password
) and set any desired password at User / New password (Ex. “653”).
Note:
Factory preset User password is “000”
Disable Password:
While desired relay password is enable, place the User / Old password and set
“000” (
Factory preset password)
as User / New password, in order to disable the
password.
Note:
Factory preset User password is “000”
02
000
653
User / Old
password
User / New
password
Relay
02
653
000
User / Old
password
User / New
password
Relay
Programming User Password
