INTELCO ELECTRONICS
10
ISO9001/2008
Rev. 1.00 January 2015
Supervisor Password
If there is no possibility of using the admin password you should contact your retailer.
The retailer will ask the Serial Number of the device, which will be used, after identification
of the owner, in an algorithm that will generate Supervisor Password.
Programming Supervisor Password:
While device is powered up Supervisor password must be typed according the below way.
After code typed well device will response with 5 short buzzer sounds (150 ms pause
between each other)
There is always the possibility to return the device to the factory for reprogramming the
factory settings (Factory Reset).
XXXX
Retailer given
number
