Intel X38ML - Server Board Motherboard Technical Manual Download | Manualshive

Page: 63 / 132

background image

Intel® Server Board X38ML

System BIOS

Revision 1.3

Intel order number E15331-006

51

4.6

Recovery Mode

You can initiate the recovery process by setting the recovery jumper. The BIOS detects that the
recovery jumper is set and executes code from the backup boot blocks.

A BIOS recovery can be accomplished from a SATA CD-ROM and USB mass storage device.
Recovery from USB floppy is not supported. A SATA CD image for recovery is created using the
El-Torito format image as per the published release notes.

The recovery media must contain the image file FV_MAIN.FV in the root directory, along with
the following files:

IFLASH32.EFI

*.CAP

Update.NSH

Recovery process:

1. The user moves the BIOS Recovery Mode jumper from normal operation to recovery

operation. Refer to Section

7.8

for the definition of the jumper.

2. The user inserts the recovery medium and powers on the system.

3. The BIOS starts the recovery process by loading and booting to the recovery image file

(FV_MAIN.FV) on the root directory of the recovery media (SATA CD or USB disk). This
process takes place before any video or console is available.

4. The BIOS POST screen appears and displays the progress. The user selects the option

to boot the EFI SHELL, which is embedded in the BIOS. The system boots the EFI
SHELL.

5. The user runs Update.NSH. This is an auto-executed script file that uses the new

capture file (*.CAP). The system loads and executes the flash update application,
IFLASH32.EFI. IFLASH32.EFI requires the supporting BIOS Capsule image file (*.CAP).
A message displays success or failure upon completion.

6. The user powers off the system and moves the recovery jumper back to the normal

operation position and then restarts the system. DO NOT INTERRUPT THE POST
PROCESS AT THE FIRST BOOT.

4.7

OEM Logo

A firmware volume is reserved for OEMs. The OEM firmware volume holds the OEM logo and is
updated independently of other firmware volumes. The OEM firmware volume hosts a firmware
file system. The size of the OEM firmware volume is 128 KB.

The OEM FV can include the OEM splash logo. If an OEM logo is located in the firmware
volume, it is used in place of the standard Intel logo. The logo file can be identified based on the
file name.

«
...
61
62
63
64
65
...
»

Summary of Contents for X38ML - Server Board Motherboard





































































































































Reviews:

No comments

Related manuals for X38ML - Server Board Motherboard

Brand: IBM Pages: 908

APSolute Vision

Brand: Radware Pages: 81

Brand: Hi-flying Pages: 29

Digital Audio Server

Brand: CAAS Audio Pages: 23

Brand: Buffalo Pages: 2

Sun Fire Netra 1280

Brand: Sun Microsystems Pages: 10

xSeries 440 8687

Brand: IBM Pages: 80

xSeries 230 6RY

Brand: IBM Pages: 194

Brand: Xblue Networks Pages: 2

Brand: HP Pages: 94

Integrity rx5670

Brand: HP Pages: 46

Brand: HP Pages: 98

NetServer AA 4000

Brand: HP Pages: 82

Brand: HP Pages: 25

HPE ProLiant ML30 Gen9

Brand: HP Pages: 112

Brand: HP Pages: 28

Brand: HP Pages: 56

Hyper Converged 380

Brand: HP Pages: 125

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands