Intel UltraBookIIi, User Manual

Page: 94 / 158

A–6 UltraBookIIi User Guide
As an added convenience, the UltraBookIIi
provides a J13W3 port on the back panel for
attaching an external monitor, as shown in
Figure A-8.
External Monitor Support
Sun-type or other self-sensing monitors with J13W3
connectors plug directly into the external video port on
the UltraBookIIi back panel, as shown in Figure A-8.
If you have a different type of monitor, check your
monitor manual and Appendix E for compatibility and
use the included adaptor to connect the monitor.
When using the internal LCD, an external syncing
monitor can also be attached, allowing simultaneous
LCD and monitor operation. For non-Sun or
non-self-sensing monitors you will need a J13W3-to-
VGA adapter. If external non-syncing monitors are
used, the internal LCD will not operate during external
monitor operation (it will be blanked).
The UltraBookIIi supports simultaneous
on-board and external video device display
using VESA standard 1024 x 768 x 60Hz
mode and timing.
The UltraBookIIi supports the following external
monitor standards:
•
SVGA (800 x 600)
• XGA (1024 x 768)
• Sun (1152 x 900)
• SXGA (1280 x 1024)
• Frame rates, 60 Hz, 72 Hz, 76 Hz
For more information on using external monitors, see
Appendix E.