Intel UltraBookIIi, User Manual

Page: 52 / 158

3–24 UltraBookIIi User Guide
4. Using a small Phillips screwdriver, remove
the memory access cover as shown below.
5. Remove the memory module(s) using one of
the procedures described on the following
pages.
Caution: Do not place the screwdriver
against any printed circuits, individual
memory module chips, or points of contact
other than those shown in the following
illustrations. Prying at other points of contact
may damage your memory modules or the
main system board and void your warranty
with Tadpole-RDI.
a. Using a small Phillips screwdriver, remove the
mounting screws on the memory module(s) you
are replacing.
Figure 3-11 Removing the Memory Cover