Intel True Scale Fabric Switches 12200 Installation Manual Download Page 33

Page: 33 / 103

True Scale Fabric Switches 12000 Series Hardware

July 2015

Installation Guide

Order Number: G91928004US

12000 Series Switches

5. Orient the chassis such that mounting flanges are in the front of the rack. Install

the chassis in the rack.

Warning:

To avoid injury, when fully loaded do not lift manually. Use a mechanized lift only. If a

manual lift is necessary, first unload all field replaceable units (FRUs) to minimize

weight. Use a team of people appropriate to the weight of the product and in

conjunction with applicable laws and guidelines.

6. Fasten the mounting flanges using M6 screws to the clip nuts that are pre-installed

in the rack. There are six (6) screws per mounting flange. Torque to 30in-lb.

Figure 25.

Flat Bracket Installation

Summary of Contents for True Scale Fabric Switches 12200








































































































Search results

Summary of Contents for True Scale Fabric Switches 12200

Reviews:

Brands by name

Popular brands

Intel True Scale Fabric Switches 12200, Installation Manual

Search results

Summary of Contents for True Scale Fabric Switches 12200

Reviews:

Brands by name

Popular brands