manualshive.com logo in svg

Intel True Scale Fabric Switches 12200, Installation Manual

Share
Download
Intel True Scale Fabric Switches 12200 Installation Manual Download Page 21

True Scale Fabric Switches 12000 Series Hardware

July 2015

Installation Guide

Order Number: G91928004US

21

12000 Series Switches

2.4

12800-040 Installation

Note:

The following procedures are for installing the switch using variable distances between 

the front and rear rack posts.

2.4.1

Mounting Hardware Kit Contents

Note:

The mounting kit contains all of the necessary parts for installing and mounting the 

switch into a 19" 4-post server rack, with a distance between front and rear rack posts 

ranging from 28" - 33" (711mm - 838mm).

• Support Rails
• HAT Brackets
• C-Brackets
• #8–32 Flat Head Screws
• M6 Mounting Screws
• M6 Clip Nuts

2.4.2

Installation Tasks

1. Install the clip nuts. Install M6 clip nuts in the following locations on EIA rails:

For improved stability, orient the clip nuts as shown (that is, orient the flanges 

horizontally):

Figure 10.

Clip Nut Installation Locations

Summary of Contents for True Scale Fabric Switches 12200








































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands