Maintaining the System
59
8. Remove and save the four screws (Figure 48, A) that hold the bay assembly to the bottom of
the chassis.
OM11143
A
D
C
B
Figure 48. Removing the Hot Swap Bay
9. Remove and save the two screws (B) that hold the bay assembly to the front of the chassis.
10. Slide the chassis out of the tabs on the bottom of the chassis and tilt the backplane side of the
bay up and toward the front of the chassis (C).
11. Pull the bay out and clear of the chassis and set the front of bay on a flat working surface.
Summary of Contents for SR2100
