Assembling the System
45
Power Supply Module
Your server does not include a second, redundant power supply module. To take advantage of
power supply redundancy, you must purchase the second module separately and install it.
To install a second power supply module:
1. Locate the power supply and the blank filler panel (the one with no perforations) at the rear of
the server.
2. Grip and squeeze the handle of the blank filler panel (Figure 28, A) to release the latch.
3. Rotate the handle down while pulling the filler panel toward you. Pull the blank out and save it.
4. Insert the second, redundant power supply module in the bay.
5. Grip the module handle, rotate it down, and push the module into the bay.
6. When the module is nearly all of the way in, the handle will rotate up. At this time, push firmly
on the front of the handle to lock the latch.
7. Install the second power cord into the strain relief.
8. Connect the cord to the power supply, and plug it into the AC power source.
OM11241
Figure 28. Installing a Redundant Power Supply Module
Summary of Contents for SR2100
