Intel SR2100, Product Manual

Page: 19 / 96

19
4 Assembling the System
Before the SR2100 can be installed for use, you must assemble the hardware components that make
up your particular system. Minimally, you must install a server board with the desired number of
processors and memory. Additionally, you will want to add any peripherals and add-in cards
purchased for the system. The following procedures help guide you through this assembly process
and create your desired system configuration.
✏
NOTE
To maintain and ensure regulation compliance, the fully integrated system
shall be tested, certified and/or documented to illustrate compliance to the
regional regulations and laws for where the product will be sold. The
peripherals and add-in cards chosen for integration should have individual
regulatory approvals.
Before You Begin
Before you start the assembly process you will need to have the right tools available to you and you
will need to make sure you follow certain basic safety precautions.
Tools and Supplies Needed
Before beginning your work, make sure you have the following tools and supplies available:
•
Phillips (cross head) screwdriver (#2 bit)
•
Anti-static wrist strap (recommended)
•
SR2100 subassembly kit
•
Server board kit
•
Processors and memory you purchased separately to add to the server board
•
Optional peripherals and add-in cards you want to include in the system
Installation/Assembly Safety Instructions
CAUTION
Integration / servicing of this chassis sub-assembly shall be performed only
by technically qualified persons.
Follow these guidelines to meet and maintain safety and product regulatory
requirements when integrating this chassis subassembly.
Read and adhere to all of these instructions and the instructions supplied with
this assembly. If you do not follow these instructions, the UL listing and
other regulatory approvals will be void, and the product will most likely be
non-compliant with regional product laws and regulations.