Intel SR1680MV - Server System - 0 MB RAM, Service Manual

Page: 33 / 196

Intel
®
Server System SR1680MV Service Guide 13
You can install single or dual processors on the motherboard according to your own needs.
1. If a SINGLE processor is intended, it is recommended that you install the processor
on the processor 1 socket. Refer to Figure 10.
2. If installing DUAL processors, use the same type of processor running at the same
frequency.
Note: Before you remove or install the heatsink, processor or heatsink socket, complete the
following steps:
1. Make sure the server is not turned on or connected to the AC power. To power off
the server, see “Power Off”
2. Remove the chassis cover. To remove the cover, see “Mid-Top Cover” .
Removing the Processor
1. Unlock the load lever and lift it up.
2. Open the load plate.
Figure 11. Opening the Load Plate
3. Lift the processor out of the socket.