Intel SR1680MV - Server System - 0 MB RAM Service Manual Download Page 26

Page: 26 / 196

Intel

Server System SR1680MV Service Guide

The back view LEDs and buttons information display details regarding the LEDs and

buttons of the two I/O boards and AC power LED.

Rear Panel Button and LEDs

Figure 6. Back View LEDs and Buttons of Two I/O Boards

The following table provides detailed LED information.

LED Information

1. Rear UID Buttons

4. NIC 1&2 Link LEDs

2. Rear UID LEDs

5. AC Power LED

3. NIC 1&2 Activity LEDs

Table 2. LED Information

Feature

Color

Description

Front View LEDs

Power LED

Amber

On: System has AC power but in standby mode.

Green

On: System has AC power and is turned on.

Off: No AC power to the system.

Summary of Contents for SR1680MV - Server System - 0 MB RAM





































































































































































































Search results

Summary of Contents for SR1680MV - Server System - 0 MB RAM

Reviews:

Related manuals for SR1680MV - Server System - 0 MB RAM

Brands by name

Popular brands

Intel SR1680MV - Server System - 0 MB RAM, Service Manual

Search results

Summary of Contents for SR1680MV - Server System - 0 MB RAM

Reviews:

Related manuals for SR1680MV - Server System - 0 MB RAM

Brands by name

Popular brands