Intel SR1680MV - Server System - 0 MB RAM Service Manual Download Page 119

Page: 119 / 196

Intel

Server System SR1680MV Service Guide

Embedded SATA RAID

This section provides an overview of the SATA Software RAID options embedded on the

server board.

The Intel

SR1680MV server is embedded the Intel

Matrix Storage Manager with

support for RAID levels 0, 1 and with drivers to support Microsoft Windows* operating

systems.

Enabling RAID in the BIOS Setup

By default, the BIOS does NOT enable RAID support. To enable this feature, you must set

an option in the BIOS setup as described in the following procedure:

1. Enter the BIOS Setup (Del Key) during POST.
2. Go to the Advanced menu, select SATA Configuration and press <Enter>.
3. Set the Configure SATA AS as option to [RAID].
4. Save your changes and then exit BIOS Setup.

For more information, refer to the

Intel

Matrix Storage Manager 8.x User's Manual

Summary of Contents for SR1680MV - Server System - 0 MB RAM





































































































































































































Search results

Summary of Contents for SR1680MV - Server System - 0 MB RAM

Reviews:

Related manuals for SR1680MV - Server System - 0 MB RAM

Brands by name

Popular brands

Intel SR1680MV - Server System - 0 MB RAM, Service Manual

Search results

Summary of Contents for SR1680MV - Server System - 0 MB RAM

Reviews:

Related manuals for SR1680MV - Server System - 0 MB RAM

Brands by name

Popular brands