Intel SR1680MV - Server System - 0 MB RAM Service Manual Download Page 31

Page: 31 / 196

Intel

Server System SR1680MV Service Guide

Unplugging the Power Cord

You must first unplug the power cord from the AC outlet and then from the server.

Figure 8. Unplugging the Power Cord

Mid-Top Cover

The server is a 1U form factor designed for easy assembly and disassembly, making the

replacement of internal components convenient.

Note:

Before you remove or install the rear top cover, follow this step:

1. Make sure the server is not turned on or connected to the AC power. To power off

the server, see

“Power Off”

Removing the Mid-Top Cover

1. Release the screw on the mid-top cover.
2. Press down the locking button along the direction of the arrow.
3. Simultaneously slide the mid-top cover forward in the direction of the arrow using

the traction pad, and then lift it up.

Summary of Contents for SR1680MV - Server System - 0 MB RAM





































































































































































































Search results

Summary of Contents for SR1680MV - Server System - 0 MB RAM

Reviews:

Related manuals for SR1680MV - Server System - 0 MB RAM

Brands by name

Popular brands

Intel SR1680MV - Server System - 0 MB RAM, Service Manual

Search results

Summary of Contents for SR1680MV - Server System - 0 MB RAM

Reviews:

Related manuals for SR1680MV - Server System - 0 MB RAM

Brands by name

Popular brands