background image

Regulatory and Certification

 

Intel® Server Board S5500HV/Intel® Server System SR1670HV TPS 

Revision 1.2 

Intel Confidential 

72 

 

Intel order number E69391-006 

Compliance  
Description 

Compliance Reference 

Compliance Reference Marking 

Example 

Finnish on line 3: 

“Laite on liitettävä 

suojamaadoituskoskettimilla 
varustettuun pistorasiaan.” 
English on line 4: 

“Connect only to a properly 

earth grounded outlet.” 

 

 Country of Origin 

 Logistic Requirements 
 Applied to products to indicate where product was 
 made. 

        

Made in XXXX 

 

10.5

 

Component Regulatory Requirements to Support System and/or 
Baseboard Level Certifications 

Various components and materials require component level certifications to support server 
system and/or server baseboard level certifications. Certification of components shall be at the 
most current certifications standard. 

Power Supplies 

Minimum Certifications: 
UL, cUL Recognition (Canada/USA) 
CE DOC (Europe) 
CB Certificate & Report (International)  

Note:

 CB to include all CB national deviations) Certification marks to be visible on power 

supply. Power supply is to comply with the Intel power supply specification. 

 

Peripheral Devices (e.g. Disk Drives, CD ROMs)

 

Minimum Certifications: 
UL, cUL Recognition (Canada/USA), CE DOC (Europe), One European Approval (e.g. TUV or 
VDE; or SEMKO, NEMKO or DEMKO). Certification marks to be visible on peripheral 

Fans 

 

Minimum Certifications: UL and TUV or VDE. Certification marks to be visible on fan 

 

Current Limiting Devices (Used for Safety Purposes)

 

Such Devices may be fuse, PTC or other). Minimum Certifications: UL and TUV or VDE 
 

Lithium Batteries

  

Require being UL recognized; and battery circuits are to have suitable reverse bias current 
protection for the application it is used in. Certification marks to be visible on battery 

Printed Wiring Boards 

Requires being UL Recognized board from a UL approved bare board fabricator/manufacturer. 
Ratings require being minimum V-0 and 130C. Fabricators name and/or trade mark; UL symbol 

Summary of Contents for SR1670HV - Server System - 0 MB RAM





























































































Reviews: