Product Safety Information
Intel® Server Board S5500HV/Intel® Server System SR1670HV TPS
Revision 1.2
Intel Confidential
74
Intel order number E69391-006
11.
Product Safety Information
This document applies to Intel
®
Server Boards, Intel
®
Server Chassis (pedestal and rack-mount)
and installed peripherals. To reduce the risk of bodily injury, electrical shock, fire, and
equipment damage, read this document and observe all warnings and precautions in this guide
before installing or maintaining your Intel
®
server product.
In the event of a conflict between the information in this document and information provided with
the product or on the website for a particular product, the product documentation takes
precedence.
Your server should be integrated and serviced only by technically qualified persons. You must
adhere to the guidelines in this guide and the assembly instructions in your server manuals to
ensure and maintain compliance with existing product certifications and approvals. Use only the
described, regulated components specified in this guide. Use of other products/components will
void the UL Listing and other regulatory approvals of the product, and may result in
noncompliance with product regulations in the region(s) in which the product is sold.
11.1
Safety Warnings & Cautions
To avoid personal injury or property damage, before you begin installing the product, read,
observe, and adhere to all of the following safety instructions and information. The following
safety symbols may be used throughout the documentation and may be marked on the product
and/or the product packaging.
CAUTION
Indicates the presence of a hazard that may cause minor
personal injury or property damage if the CAUTION is ignored.
WARNING
Indicates the presence of a hazard that may result in serious
personal injury if the WARNING is ignored.
Indicates potential hazard if indicated information is ignored.
Indicates shock hazards that result in serious injury or death if
safety instructions are not followed.
Indicates hot components or surfaces.
Indicates do not touch fan blades, may result in injury.
Indicates to unplug all AC power cord(s) to disconnect AC power
11.2
Site Selection
The system is designed to operate in a typical office environment. Choose a site that is:
Clean, dry, and free of airborne particles (other than normal room dust).
Well-ventilated and away from sources of heat including direct sunlight and radiators.
Away from sources of vibration or physical shock.
Isolated from strong electromagnetic fields produced by electrical devices.