Intel SCB2 - Server Board Motherboard Product Manual Download Page 66 | Manualshive

Page: 66 / 108

background image

66

Intel Server Board SCB2 Product Guide

Platform Event Manager Add-in

The Platform Event Manager (PEM) provides an interface for configuring Platform Event Paging
(PEP), the Emergency Management Port (EMP), BMC LAN Configuration (LAN) and Platform
Event Filtering (PEF).

Platform Event Manager Window

The PEM presents a main window to the user and supports several features (see Figure 25). These
features appear in additional detail in the following sections. Note that each option included on the
main window supports an accelerator key. An underlined letter in the text listing the option in
VGA mode indicates accelerator keys. In text mode, accelerator key letters appear highlighted
rather than underlined.

Figure 25. Platform Event Manager Main Window

Buttons

•

Configure PEP: Opens a new dialog that allows you to configure the Platform Event Paging
features.

•

Configure LAN: Opens a new dialog that allows you to configure the
BMC LAN-Configuration features.

•

Configure EMP: Opens a new dialog that allows you to configure the Emergency
Management Port features.

•

Close: Exits the Platform Event Manager and returns you to the AF.

•

Help: Displays help information.

«
...
64
65
66
67
68
...
»

Summary of Contents for SCB2 - Server Board Motherboard













































































































Reviews:

No comments

Related manuals for SCB2 - Server Board Motherboard

BullSequana Edge nano

Brand: Atos Pages: 29

BizNAS D400 Series

Brand: Tandberg Data Pages: 2

Brand: Supermicro Pages: 96

Brand: Supermicro Pages: 130

Brand: Supermicro Pages: 124

Advanced Office-in-a-Box

Brand: Enconnex Pages: 40

Brand: Supermicro Pages: 72

Brand: Supermicro Pages: 78

Brand: Supermicro Pages: 82

Brand: EEG Pages: 32

Brand: Planet Networking & Communication Pages: 97

TimeProvider 5000

Brand: Symmetricom Pages: 534

Brand: Tektronix Pages: 1026

Brand: Intel Pages: 17

Brand: GRASS VALLEY Pages: 2

ProtectServer 3 HSM

Brand: Thales Pages: 96

Brand: QUANTA Pages: 65

Brand: Raritan Pages: 272

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands