Intel SBXD62 - Server Compute Blade, Installation And User Manual

Page: 30 / 118

20 Intel® Server Compute Blade SBXD62 Installation and User’s Guide
The following illustration shows how to install a SAS hard disk drive.
To install a SAS hard disk drive, complete the following steps:
1. Read the safety information beginning on page 65 in Appendix C, “Safety
Information” and “Installation Guidelines” on page 15 .
2. Shut down the operating system, turn off the blade server, and remove the blade server
from the Intel® Blade Server Chassis SBCE. See “Removing the Blade Server from
an Intel® Blade Server Chassis SBCE” on page 17 for instructions.
3. Carefully lay the blade server on a flat, non-conductive surface.
4. Open the blade server cover (see “Opening the Blade Server Cover” on page 18 for
instructions).
5. Locate SAS connector 0 (J95) or SAS connector 1 (J94).
Note: Do not press on the top of the drive. Pressing the top could damage the drive.
6. Put the drive into the tray and push it, from the rear edge of the drive, into the
connector until the drive moves past the lever at the back of the tray.
7. If you have other options to install or remove, do so now; otherwise, go to
“Completing the Installation” on page 30
SAS ID 0
SAS ID 1
Hard
drive
release
lever
Hard drive
release
lever
AF000435