Intel S1200V3RP Technical Product Specification Download Page 124

Page: 124 / 270

BIOS Setup Interface

Intel®

Server Board S1200V3RP TPS

Revision 1.2

110

Back to [Advanced Screen]

— [Screen Map]

18. Intel(R) VT for Directed I/O

Option Values:

Enabled

Disabled

Help Text:

Enable/Disable Intel (R) Virtualization Technology for Directed I/O (Intel (R) VT-d).

Report the I/O device assignment to VMM through DMAR ACPI Tables.

Comments:

This option is only visible if all processors installed in the system

support Intel® VT-d. The software configuration installed on the system must support
this feature in order for it to be enabled.

Back to [Advanced Screen]

— [Screen Map]

19. Interrupt Remapping

Option Values:

Enabled

Disabled

Help Text:

Enable/Disable Intel (R) VT-d Interrupt Remapping support. For some processors, this
option may be "always enabled".

Comments:

This option only appears when Intel

Virtualization Technology for

Directed I/O is Enabled. For some processors this will be enabled unconditionally
whenever Intel

VT-d is enabled. In that case, this option will be shown as "Enabled",

and grayed out and not changeable.

Back to [Advanced Screen]

— [Screen Map]

20. Pass-through DMA Support

Option Values:

Enabled

Disabled

Help Text:

Enable/Disable Intel (R) VT-d Pass-through DMA support. For some processors, this
option may be "always enabled".

Comments:

This option only appears when Intel

Virtualization Technology for

Directed I/O is Enabled. For some processors this will be enabled unconditionally

Summary of Contents for S1200V3RP















































































































































































































































































Search results

Summary of Contents for S1200V3RP

Reviews:

Brands by name

Popular brands

Intel S1200V3RP, Technical Product Specification

Search results

Summary of Contents for S1200V3RP

Reviews:

Brands by name

Popular brands