Intel S1200V3RP Technical Product Specification Download Page 121

Page: 121 / 270

Intel®

Server Board S1200V3RP TPS

BIOS Setup Interface

Revision 1.2

107

Help Text:

Intel(R)

Turbo Boost Technology allows the processor to automatically increase its

frequency if it is running below power, temperature, and current specifications.

Comments:

This option is only visible if all processors installed in the system

support Intel

Turbo Boost Technology. In order for this option to be available, Enhanced

Intel

SpeedStep

Technology must be Enabled.

Back to [Advanced Screen]

— [Screen Map]

11. Enhanced Intel SpeedStep(R) Tech

Option Values:

Enabled

Disabled

Help Text:

Enhanced Intel SpeedStep

(R) Technology allows the system to dynamically adjust

processor voltage and core frequency, which can result in decreased average power
consumption and decreased average heat production.

Contact your OS vendor regarding OS support of this feature.

Comments:

When Disabled, the processor setting reverts to running at Max

TDP Core Frequency (rated frequency).

This option is only visible if all processors installed in the system support Enhanced
Intel

SpeedStep

Technology. In order for the Intel

Turbo Boost option to be available,

Enhanced Intel

SpeedStep

Technology must be Enabled.

Back to [Advanced Screen]

— [Screen Map]

12. Processor C3

Option Values:

Enabled

Disabled

Help Text:

Enable/Disable Processor C3 (ACPI C2/C3) report to OS

Comments:

This is normally Disabled but can be Enabled for improved

performance on certain benchmarks and in certain situations.

Back to [Advanced Screen]

— [Screen Map]

13. Processor C6

Option Values:

Enabled

Summary of Contents for S1200V3RP















































































































































































































































































Search results

Summary of Contents for S1200V3RP

Reviews:

Brands by name

Popular brands

Intel S1200V3RP, Technical Product Specification

Search results

Summary of Contents for S1200V3RP

Reviews:

Brands by name

Popular brands