Hardware Installations and Upgrades
5.
Remove the air duct. For instructions, see
Before Installing Intel
®
I/O Expansion Module at the Left Edge of the
Board (Optional)
1.
Install the module to the provided bracket (see letter
A
).
2.
Secure the module to the bracket with the three screws (see letter
B
).
3.
Install the provided connector converter (see letter
C
).
Figure 60. Installing Intel
®
I/O Expansion Module
Installing Intel
®
I/O Expansion Module
1.
Remove the screw securing the filler panel from the chassis and remove the filler panel (see
letter
A
).
2.
Position the module over the server board, fit the front of the module into the back panel slot
(see letter
B
).
3.
Attach the module to the server board connector (see letter
C
).
4.
Secure the module with the two screws as shown (see letter
D
).
Intel
®
Server System R2000LH2/LT2 Service Guide
37
