Hardware Installations and Upgrades
Figure 53. Installing Hard Disk Drive – Removing 2.5
"
HDD carrier
2.
Remove the four screws securing the plastic drive blank from the 2.5" HDD carrier (see letter
C
). Disengage the plastic drive blank from the HDD carrier. Remove the plastic drive blank
from the 2.5" HDD carrier (see letter
D
).
Figure 54. Installing Hard Disk Drive – Removing Plastic Drive Blank
3.
Install the hard disk drive using the four screws as shown. Make Sure the connector end of the
drive matches the backplane connector (see letter
E
).
Figure 55. Installing Hard Disk Drive – Installing 2.5
"
HDD
4.
With the lever open, insert the hard disk drive assembly into the chassis, then push in the lever
to lock it into place (see letter
F
).
34
Intel
®
Server System R2000LH2/LT2 Service Guide
