Intel R1304BTLSFAN Service Manual Download Page 11

Page: 11 / 112

Server System R1304BTSSFAN/R1304BTLSFAN/R1304BTLSHBN Service Guide

Server System References

If you need more information about this product or information about the accessories that
you can use with this server chassis, use the following resources.

Technical information
about the server chassis,
including sub-system
overviews and
mechanical drawings

Intel

Server System R1304BTSSFAN/R1304BTLSFAN/

R1304BTLSHBN

Technical Product Specification

Intel

Server System S1200BT Technical Product Specification

http://www.intel.com/support/motherboards/server/

If you just received this
product and need to
install it

Intel

Server System R1304BTLSFAN/R1304BTLSHBN Quick

Start User's Guide

in the product box.

Accessories or other Intel
server products

Spares/Parts List & Configuration Guide

This is available from your Intel field representative or on the Server
Configurator Tool at:

http://serverconfigurator.intel.com/default.aspx

Hardware (peripheral
boards, adapter cards)
and operating systems
that have been tested with
this product

For the Tested Hardware Operating Systems List, you can go to the
Intel

Server Configurator Tool:

http://serverconfigurator.intel.com/default.aspx

Processors that have
been tested with this
product

Supported processors can be found at:

http://www.intel.com/support/motherboards/server/

DIMMs that have been
tested with this product

Supported memory can be found at:

http://www.intel.com/support/motherboards/server/

To make sure your system
falls within the allowed
power budget

Power Budget Tool

http://www.intel.com/support/motherboards/server/

For software to manage
your Intel

server

Intel

System Management

http://www.intel.com/support/motherboards/server/

For drivers

Driver (for an extensive list of drivers available)

Operating System Driver (for operating system drivers)

http://www.intel.com/support/motherboards/server/

For firmware and BIOS
updates

Firmware can be found at:

http://www.intel.com/support/motherboards/server/

For diagnostics test
software

Diagnostics

http://www.intel.com/support/motherboards/server/

For this Information or

Software

Use this Document or Software

Summary of Contents for R1304BTLSFAN

















































































































Search results

Summary of Contents for R1304BTLSFAN

Reviews:

Related manuals for R1304BTLSFAN

Brands by name

Popular brands

Intel R1304BTLSFAN, Service Manual

Search results

Summary of Contents for R1304BTLSFAN

Reviews:

Related manuals for R1304BTLSFAN

Brands by name

Popular brands