3
General Installation Process
E. Close Load Plate and Socket Lever
Close the socket lever and ensure that
the load plate tab engages under the
socket lever when fully closed.
With your finger, push down on the
load plate as shown.
C
A
B
D. Install the Processor
CAUTION: The underside
of the processor has
components that may damage
the socket wires if installed
improperly.
DO NOT DROP processor
into the socket!
Processor must align
correctly with the socket
opening before installation.
Components
Orient the processor with the socket
so that the orientation notches
on the processor align with the
two orientation posts on the socket.
A
Install the processor as shown.
Orientation Posts
Orientation Notches
A
A
B
C
Close the load plate all
the way as shown.
Install the Processor ...continued
Cautions:
1. When opening a socket,
DO NOT TOUCH the gold
socket wires.
A. Open the
Socket Lever
Rotate the lever open all
the way.
B. Open the
Load Plate
Open the load plate as shown.
Push the lever handle down
and away from the socket
to release it.
A
B
Push the rear tab with your
finger tip to bring the front end
of the load plate up slightly.
A
B
C. Remove the Processor
Protective Cover
2. When unpacking a pro-
cessor, hold by the edges
only to avoid touching the
gold contact wires.
A
B
A
B
A
Take the processor out of
the box and remove the
protective shipping cover.
A
5
Install the Processor
Summary of Contents for R1000SP
Page 2: ...This page is intentionally left blank...
Page 20: ...G64256 003...