A
Regulatory and Integration lnforma tion
Prevent Power Supply Overload
Unless the power supply has inherent
overcurrent protection, do not overload the
power supply output. To avoid overloading the
power supply, make sure that the calculated
total current load of all the modules within the
computer is less than the output current rating of
the power supply. If you do not do this, the
power supply could overheat, catch fire, or
damage the insulation that separates hazardous
AC line circuitry from low-voltage user accessible
circuitry. If the load drawn by a module cannot
be determined by the markings and instructions
supplied with the module, contact the module
supplier’s technical support.
Place Battery Marking on the
Computer
There is insufficient space on this motherboard
to provide instructions for replacing and
disposing of the battery. The following warning
must be placed permanently and legibly on the
host computer as near as possible to the battery.
A
WARNING
Danger of explosion if battery is
incorrectly replaced.
Replace with only the same or
equivalent type recommended by the
manufacturer. Dispose of used
batteries according to the
manufacturer’s instructions.
Use Only for Intended Applications
This product was evaluated for use in computers
that will be installed in offices, homes, schools,
computer rooms and similar locations. The
suitability of this product for other applications,
(such as medical, industrial, alarm systems, and
test equipment) may require further evaluation.