manualshive.com logo in svg

Intel PD440FX, Product Manual, Page: 69 / 80

Share
Download
Intel PD440FX Product Manual Download Page 69

 and

ntegration Information

This appendix contains:

Safety Standards

l 

Safety standards, electromagnetic

compatibility regulations, and product
certification markings for this motherboard

l

Instructions and precautions for integrators

who are installing this motherboard in a
chassis

UL 1950   CSA 

 edition, 28 July

1995

The Standard for Safety of Information
Technology Equipment including Electrical

Business Equipment. (USA and Canada)

Regulatory Requirements

This printed circuit assembly meets the following
safety and electromagnetic interference

regulations when correctly installed in a
compatible host computer.

CSA C22.2 No. 

 Edition

The Standard for Safety of Information
Technology Equipment including Electrical

Business Equipment. (Canada)

EN 60 

 Edition, 1992 (with

Amendments 

 and 3)

The Standard for Safety of Information
Technology Equipment including Electrical

Business Equipment. (European Union)

Summary of Contents for PD440FX

















































































Reviews:

No comments