Intel
®
Server Chassis P4304XXMFEN2/P4304XXMUXX Product Family System Integration and Service Guide
60
3.1
Optical Drive – Installation and Removal
This section provides installation and removal instructions for an optionally installed SATA optical
drive for systems that support the option.
3.1.1
Optical Drive Installation
Note:
The optical drive is NOT hot-swappable. Before removing or replacing the drive, you must first
take the server out of service, turn off all peripheral devices connected to the system, turn off the system
by pressing the power button, and unplug the power cord from the system or wall outlet.
1.
Remove an EMI shield (see letter “A”).
Figure 32. Removing the EMI Shield
2.
Get the slides from the chassis side (see letter “B”). Attach the slides to the optical drive by pressing
the slides firmly into the side dimples on the optical drive (see letter “C”). Insert the drive/slide
assembly into the device bay until the slides lock into place (see letter “D”).
Figure 33. Installing the Optical Drive
3.
Connect the optical power cable and data cable.