Intel
®
Server Chassis P4304XXMFEN2/P4304XXMUXX Product Family System Integration and Service Guide
50
2.7.7
Upgrading the Fixed Drive Storage to 8x3.5” Hot-swap Drive Bay
Storage
The server chassis can support two 4x3.5” hot-swap drive bays as an upgrade option from fixed drive
storage.
Remove the chassis side cover following instructions in section “Chassis Side Cover Removal”.
Remove the front bezel following instructions in section “Removing the Front Bezel”.
Remove the fixed drive trays.
Install the drive bays.
Note:
The drive bay on the upper position should be installed first, then the second drive bay on the
lower position.
Cable connection:
On server board side, connect the miniSAS HD cable header to the server board connector labeled
as “sSATA_0-3” and “SATA_0-3”.
