Intel
®
Server Chassis P4304XXMFEN2/P4304XXMUXX Product Family System Integration and Service Guide
57
2.7.10
8 x 2.5” Front Drive Bay Storage
2.7.10.1
2.5” Drive Carrier Extraction
Figure 28. Installing Hot-swap Storage Devices – 2.5” Carrier Extraction
1.
Remove the drive carrier from the chassis by pressing the green button and pulling open the lever
(see letter “A”).
2.
Pull the carrier out of the drive bay (see letter “B”).
2.7.10.2
2.5” Hard Disk Drive (HDD) / SoIid State Device (SSD) Installation
Figure 29. 2.5” Storage Device Installation – Removing the Drive Blank
1.
Remove the four screws securing the plastic drive blank to the carrier (see letter “C”).
2.
Remove the drive blank from the carrier (see letter “D”).
